Bowen Replacement Belt | Custom Leather Belt with Sheath
Custom Handcraft Leather Belt designed for Single Edge or Double Edges BOWEN Buckle Knives. Belts are made of Vachetta leather. Vachetta leather is type of full-grain, vegetable-tanned calfskin/steerhide leather. The leather was popular in the Italian region of Tuscany, and became called Tuscan leather or Florentine Vachetta leather.Description: Sheath for the buckle knife are designed with leather welts. Besides adding stiffness to the sheath, the welts protects the stitching from being cut by the sharp edges of the knife, it’s also help for quickly and easily drawing the knife Hand sewing by wax threads with saddle stitching technic for durablity. Belt edges beveled and wax-burnish. Belt keeper (01pc included) was made very tight fit to make sure the belt not pops out from the peg stud of the buckle knife. You can also use the leather belt keychain (included) as a belt keeper if needed. Belt Thickness: 7-9oz (5/32 inches – 3.0-3.5mm) similar to original Bowen belts. This thickness helps to prevent the belt pop-up from the peg. Belt Width: Wide 1- 1/2” (1.5 inches – 40mm) Sheath: Fits for 3-1/2” long by 1” wide blade Peg Eyelet: Black brass eyelet, fit for 5/32” (inches) – 4.0mm peg stud Peg Holes: 5 holes, spaced 1” apart Color: Black / Brown (as shown in the photos. The color may slightly different due to light settings in camera and display devices) Belt Size (Belt sizes are calculated by adding 2” to the waist size): Size 32”: Length between peg eyelet to the midle peg hole: 34” (inches). Total belt length: 40” (inches).Size 34”: Length between peg eyelet to the midle peg hole: 36” (inches). Total belt length: 42” (inches).Size 36”: Length between peg eyelet to the midle peg hole: 38” (inches). Total belt length: 44” (inches).Size 38”: Length between peg eyelet to the midle peg hole: 40” (inches). Total belt length: 46” (inches).Size 40”: Length between peg eyelet to the midle peg hole: 42” (inches). Total belt length: 48” (inches).Size 42”: Length between peg eyelet to the midle peg hole: 44” (inches). Total belt length: 50” (inches)Size 44”: Length between peg eyelet to the midle peg hole: 46” (inches). Total belt length: 52” (inches).Size 46”: Length between peg eyelet to the midle peg hole: 48” (inches). Total belt length: 54” (inches)Custom size: (+$5) In case of lost or gain the weight, you can make your own size and/or with 7-9 holes (total belt length is NOT excess 54 inches). Please give me a message before making the order,Note:The leather belt comes with 01 belt keeper and 01 belt keychain. The BOWEN buckle knife is NOT included. Measure your waist size or your old (used) belt carefully to make sure you order the right belt size.The belt designed for BOWEN buckle knives with straight steel peg stud. Some other brand buckle knives may using bigger steel or brass ball-head peg studs. Those MAY required the bigger eyelets and bigger peg holes to fit. Pls contact us for custom-made orders.Shipping: US: Shipping time to location in US is around 10-15 business days. The package will be handled by USPS since the package arriving to US. The USPS tracking number will be provided and be able to tracked after 6-10 days since shipping day UK, EU, Canada and Australia: Shipping time is around 12-20 business days. The package will be handled by Royal Mail (UK) since the package arriving to UK. The Royal Mail (UK) tracking number will be provided and be able to tracked after 8-10 days since shipping day. The International shipment may be a subject of Customs Processing and required an extra shipping times.I greatly appreciate for your understanding and patience Feel free to contact us at any time if you need any further informations. Thank you for visiting and interesting of my handicrafts Proudly made by Hanoi Pearl Custom Leatherwork – Carry As A Pro
Custom Buck 110 Sheath | Vertical Belt Loop Sheath | Right Handed Sheath
The sheath was wet molded with the real Buck 112, so it fit perfectly to the knife, secure knife tightly and safely in the sheath, even in the outdoor activities. This sheath designed to fit Buck 110 Folding Hunter Clip Point Blade Knife.
Buck 112 Custom Sheath | Strongside Horizontal Carry Leather Sheath
This custom Buck 112 leather sheath is designed to horizontal carry the Buck 112 Ranger in right-handed strong-side (right side), This custom sheath allows to comfortably horizontal carry in different positions in your waist line: Appendix Carry (1-2 o’clock, above you right front pocket), Hip Carry (3 o’clock), Back Carry (4-5 o’clock, above you right back pocket), or SOB Carry (6 o’clock),.We also made similar sheath for Cross-draw Carry (worn in the left side, 10-11 o’clock position). Please check Ebay listing for the Item ID: 304171112832 if you are looking for Cross-draw Sheath.Features: Comfortable: The ergonomic designed sheath just sit along your waist-line, even if you’re driving or sitting down by the table, you may not feeling that your are carrying a knife sheath. Fast accessibility: Open-top sheath allows quick draw in a second, The ergonomic canted (around 7.5 degrees canted from horizontal line) and the holster-alike sheath helps for smoothly draw Concealable: the sheath sitting tight against your body along the waist-line, the style adds rigidity and helps minimize printing. Security: The sheath is attached directly to your belt and the thick, tough leather secure the knife very tight fit in the sheath. The sheath cover most of the knife except the handle butt to avoid the knife falling out. Durability: A custom leather sheath is not only stylish design but also can remain durable and dependable for years to come. Skillful, experienced craftsmanship and high-grade materials can deliver years of reliable service. Descriptions: The sheath was wet molded with the real Buck 112 (with Clip Point Blade), so it fit perfectly to the knife, secure the knife tightly and safely in the sheath. You may need some effort to pull the knife out of the sheath. The belt loop fit belts up to 1.5 inches (38 mm) wide. The 2 -3/8” width belt loop keep the sheath tightly to the belt to avoid of moving around and quickly drawing the knife. The sheath was made with 6-8 oz (2.5-3.2 mm) vegetable-tanned cowhide leather (High-grade vegetable cowhide from Italy tannery). We always use full-grain leather, the strongest and most durable leather to make sheaths and holsters. It help the sheaths and holsters last for years. Hand cutting, wet molding, dyeing and sewing. Hand saddle stitch techniques, double stitch at the end points for strength and durability. Leather flesh-side (back side) is treated with special wax for smooth drawing. Edges beveled and burnished. The color of the sheath are available in: Brown (Medium Brown using Old School hand dyeing techniques) Dark Brown (Chocolate) Black. We hand dyeing with leather dye agents from Fiebings (USA) and Kenda Farben (Italy). Product colors may slightly vary due to photographic lighting or your display monitor settings. Also the hand dyeing process make the sheath stylish and unique appearance.Note: We are selling the leather sheath only, the Buck 112 Ranger is NOT included. This sheath designed to fit Buck 112 Ranger Clip Point Blade. Shipping: This is International shipping from Vietnam, the shipping will be processing by Ebay’s Carrier Agent in Vietnam. The International shipment may be a subject of customs processing and required an extra time. US: Shipping time is around 8-15 business days. UK, EU, Canada and Australia: Shipping time is around 12-20 business days.Worldwide: Shipping time is around 15-25 business days.Please consider for Overseas shipping time before place an order. Your understanding and patience are greatly appreciated. Thank you! Hanoi Pearl Custom Leatherwork make a wide range of leather sheaths for Buck 110 Hunter, 112 Ranger knives: Belt loop, Clip-on, Scout (horizontal) carry, 15 degree (FBI cant) carry, 30 degree, 45 degree, 52 degree… to meets the demands of various clients. If you need any information, please feel free to contact us at anytimeThank you for your visiting and interested in my handicrafts.Proudly handcrafted by Hanoi Pearl Custom Leatherwork – Carry As A Pro!
Custom Cross Draw Leather Sheath for Buck 110 Folding Hunter
Custom 45 Degree Canted Cross Draw Leather Sheath for Buck 110 Folding Hunter, designed for right-handers, to be worn in front of non-dominant hip (in front of the left hip, 10-11 o'clock position), very easy and fast access for quick draw the knife when needed, even in seated position. Main features: Ergonomic designed for easy and quick access.Comfortable and concealable.Good choice for outdoor operations, camping, trekking... Cross draw sheath is comfortable and very easy to access from a seated position, such as long distances driving, working on the desk. It is a good choice for biker, driver, bodyguard Cross draw sheath is also a good option for for the folder which works as a back up, rescue and survival tool. This cross draw sheath can help you to save space in the dominate hip for your other primary tools or arms. Ergonomic designed with cant angle is about 45º (tilt forward) for easy and quick draw, it also reduce the holster profile on your belt for concealment. is suitable for outdoor actions or driving because the sheath not jam too much to you body or car seat while running or driving. The belt slots fit belts up to 1,5 inches (40mm) wide. The sheath was wet molded with the real Buck 110 (clip point blade), so it fit perfectly to the knife, keep the knife stay tightly and safely in the sheath. You may need some effort to pull the knife out of the sheath. The sheath was made with 7-8oz (3-3.2mm) vegetable-tanned cowhide leather. We always use full-grain leather, the strongest and most durable leather, to make sheaths and holsters. It help the sheaths and holsters last for years. The color is Brown (Medium). We use Medium Brown Leather Dye from Fiebings (USA) for dyeing the leather. Hand cutting, wet molding, dyeing and sewing. Hand saddle stitch techniques for durability. Edges beveled and burnished. All the sheath are finished with Leather Conditioner / Natural Beeswax / Sno-Seal for weather-resistant.Note: We are selling the leather sheath ONLY, the Buck 110 Hunter is NOT included. This sheath designed to fit Buck 110 Hunter Clip Point Blade. Shipping: This is International shipping from Vietnam. The International shipment may be a subject of customs processing and required an extra time. Shipping to US: Shipping time is around 10-12 business days. The package will be shipped to US then handled by USPS since the package arriving to US. The USPS tracking number will be provided and be able to tracked after 6-8 days since shipping day from VietnamShipping to UK, EU and Canada: Shipping time is around 12-20 business days. The package will be shipped to UK then handled by Royal Mail (UK) since the package arriving to UK. The Royal Mail (UK) tracking number will be provided and be able to tracked after 8-10 days since shipping day.Shipping to Australia: Shipping time is around 15-25 business days. The package will be shipped to Australia then handled by Australian Post since the package arriving to Australia. The Aus Post tracking number will be provided and be able to tracked after 8-12 days since shipping day.Please consider for International shipping time before place an order. Your understanding and patience are greatly appreciated. Thank you! Hanoi Pearl Custom Leatherwork make a wide range of leather sheaths for Buck 110 Hunter, 112 Ranger knives: Belt loop, Clip-on, Scout (horizontal) carry, 15 degree (FBI cant) carry, 30 degree, 45 degree, 52 degree… to meets the demands of various clients. For more information, please feel free to contact us at anytimeThank you for visiting and your interesting of my handicrafts. Proudly made by Hanoi Pearl Custom Leatherwork – Carry As A Pro
Custom Black 45 Degree Canted Leather Sheath for Buck 110 Folding Hunter
The leather sheath rides in the belt with forward cant angle of 45º. With this angle, you can draw the knife easily, especially in Back Carry position. The angle also make the sheath seat on the belt with low profile, so the sheath go under your coat easily.
Buck 112 Custom Sheath | Strong-side 45 Degree Canted Leather Sheath
Custom 45 Degree Canted Leather Sheath for Buck 112 Ranger / Flat-Back Pancake SheathThis custom leather sheath allows to comfortably right-handed carry the Buck 112 in various strong-side positions: Appendix Carry (Front right side, 1-2 o’clock position), Back Carry (Rear right side, 4-5 o’clock position), Hip carry(Right hip, 3 o’clock position), Ergonomic designed with 45º cant angle (tilt forward) for comfortable carry, fast access and quick draw.The leather sheath rides in the belt with forward cant angle of 45º. With this angle, you can draw the knife easily, especially in Back Carry position. The angle also make the sheath seat on the belt with low profile, so the sheath go under your coat easily. It is suitable for outdoor operations or driving because the sheath not jam too much to you body or car seat while running or driving.Belt slots fit belts up to 1,5 inches (40 mm) wide.The sheath was wet molded with the real Buck 112, so it fit perfectly to the knife, keep the knife stay tightly and safely in the sheath. You may need some effort to pull the knife out of the sheath.The sheath was made with 6-8oz (2.5-3.2mm) vegetable-tanned cowhide leather (High-grade Vachetta leather from Italy Tanneries). We always use full-grain leather, the strongest and most durable leather, to make sheaths and holsters. It help the sheaths and holsters last for years.The color is Brown (Medium Brown). We hand dyeing with old school dyeing technique with Medium Brown Leather Dye from Fiebings (USA). Actual product color may slightly vary due to photographic lighting or your display monitor setting. Also the hand dyeing make the sheath stylish and unique appearance.Hand cutting, wet molding, dyeing and sewing. Hand saddle stitch techniques for durability. Edges beveled and burnished.All the sheath are finished with Leather Conditioner / Natural Beeswax / Sno-Seal for weather-resistant strengthen. Note:We are selling the custom leather sheath only, the Buck 112 Ranger is NOT included.This sheath designed to fit Buck 112 Ranger Clip Point Blade.Shipping: This is International shipping from Vietnam, the shipping will be processing by Ebay’s Carrier Agent in Vietnam. The International shipment may be a subject of customs processing and required an extra time. US: Shipping time is around 8-15 business days. UK, EU, Canada and Australia: Shipping time is around 12-20 business days.Worldwide: Shipping time is around 15-25 business days.Please consider for Overseas shipping time before place an order. Your understanding and patience are greatly appreciated. Thank you! Hanoi Pearl Custom Leatherwork make a wide range of leather sheaths for Buck 110 Hunter, 112 Ranger knives: Belt loop, Clip-on, Scout (horizontal) carry, 15 degree (FBI cant) carry, 30 degree, 45 degree, 52 degree… to meets the demands of various clients. If you need any information, please feel free to contact us at anytimeThank you for visiting and interested in my handicrafts.Proudly handcrafted by Hanoi Pearl Custom Leatherwork – Carry As A Pro!
Custom 45 Degree Canted Leather Sheath for Buck 110 Folding Hunter
Custom 45 Degree Canted Leather Sheath for Buck 110 Folding Hunter / Flat-Back Pancake SheathThis custom leather sheath allows to comfortably right-handed carry the Buck 110 Folding Hunter in various positions: Appendix Carry (Front right side, 1-2 o’clock position), Back Carry (Rear right side, 4-5 o’clock position), Hip carry(Right hip, 3 o’clock position), Designed with 45º cant angle (tilt forward) for fast access and quick draw. The leather sheath rides in the belt with forward cant angle of 45º. With this angle, you can draw the knife easily, especially in Back Carry position. The angle also make the sheath seat on the belt with low profile, so the sheath go under your coat easily. It is suitable for outdoor operations or driving because the sheath not jam too much to you body or car seat while running or driving.Belt slots fit belts up to 1,5 inches (40 mm) wide.The sheath was wet molded with the real Buck 110, so it fit perfectly to the knife, keep the knife stay tightly and safely in the sheath. You may need some effort to pull the knife out of the sheath.The sheath was made with 6-8oz (2.5-3.2 mm) vegetable-tanned cowhide leather (High-grade Vachetta leather from Italy Tanneries). We always use full-grain leather, the strongest and most durable leather, to make sheaths and holsters. It help the sheaths and holsters last for years.The color is Brown (Medium Brown). We hand dyeing with old school dyeing technique with Medium Brown Leather Dye from Fiebings (USA). Actual product color may slightly vary due to photographic lighting or your display monitor setting. Also the hand dyeing make the sheath stylish and unique appearance.Hand cutting, wet molding, dyeing and sewing. Hand saddle stitch techniques for durability. Edges beveled and burnished.All the sheath are finished with Leather Conditioner / Natural Beeswax / Sno-Seal for weather-resistant strengthen. Note:We are selling the custom leather sheath only, the Buck 110 Hunter is NOT included.This sheath designed to fit Buck 110 Hunter Clip Point Blade.Shipping: This is International shipping from Vietnam, the shipping will be processing by Ebay’s Carrier Agent in Vietnam. Expected delivery will vary depending on your location's zone. The International shipment may be a subject of customs processing and required an extra time. US, UK: Shipping time is around 8-15 business days. EU, Canada and Australia: Shipping time is around 12-20 business days.Please consider for Overseas shipping period before place an order. Your understanding and patience are greatly appreciated. Thank you! Hanoi Pearl Custom Leatherwork make a wide range of leather sheaths for Buck 110 Hunter, 112 Ranger knives: Belt loop, Clip-on, Scout (horizontal) carry, 15 degree (FBI cant) carry, 30 degree, 45 degree, 52 degree… to meets the demands of various clients. If you need any information, please feel free to contact us at anytimeThank you for visiting and interested in my handicrafts.Proudly handcrafted by Hanoi Pearl Custom Leatherwork – Carry As A Pro!
Kydex Sheath for Cold Steel Pipe Hawk CS-90PHH & Frontier Hawk CS-90FH, Luso
Luso SheathworksFlagstaff, AZ Custom Molded for: Custom molded for the Cold Steel Pipe Hawk (CS-90PHH)Also fits the Cold Steel Frontier Hawk (CS-90FH)Paracord retention strap for extra securityTension adjustment set screwMade of 2mm Kydex, super strong but ultra light weight FREE SHIPPING IN THE USA! See our other listings for more axe sheath models
Custom Left Handed Scout Carry Leather Sheath for Buck 112 Ranger
This custom Buck 112 leather sheath is specially designed for lefthander to horizontal carry the Buck 112 Folding Ranger.This custom sheath allows lefthander to comfortably horizontal carry in different positions in left-side waist line: Appendix Carry (10-11 o’clock, above you left front pocket), Hip Carry (9 o’clock), Back Carry (7-8 o’clock, above you left back pocket), or SOB Carry (Small-of-Back, 6 o’clock),.Features:Comfortable: The ergonomic designed sheath just sit along your waist-line, even if you’re driving or sitting down by the table, you may not feeling that your are carrying a knife sheath.Fast accessibility: Open-top sheath allows quick draw in a second, The ergonomic canted (around 7.5 degrees canted from horizontal line) and the holster-alike sheath helps for quickly and smoothly drawConcealable: the sheath sitting tight against your body along the waist-line, the style adds rigidity and helps minimize printing.Security: The sheath is attached directly to your belt and the thick, tough leather secure the knife very tight fit in the sheath. The sheath cover most of the knife except the handle butt to avoid the knife falling out.Durability: A custom leather sheath is not only stylish design but also can remain durable and dependable for years to come. Skillful, experienced craftsmanship and high-grade materials can deliver years of reliable service.Descriptions:The sheath was wet molded with the real Buck 112 (with Clip Point Blade), so it fit perfectly to the knife, secure the knife tightly and safely in the sheath. You may need some effort to pull the knife out of the sheath.The belt loop fit belts up to 1.5 inches (38mm) wide. The 2 -3/8” width belt loop keep the sheath tightly to the belt to avoid of moving around and quickly drawing the knife.The sheath was made with 6-8oz (2.5-3.2mm) vegetable-tanned cowhide leather (High-grade Vachetta leather from Italy tannery). We always use full-grain leather, the strongest and most durable leather to make sheaths and holsters. It help the sheaths and holsters last for years.Hand cutting, wet molding, dyeing and sewing. Hand saddle stitch technique, double stitch at the end points for strength and durability. Leather flesh-side (back side) is treated with special wax for smooth drawing. Edges beveled and burnished.The color of the sheath are available in:Brown (Old-school Hand-dyeing Medium Brown)Dark Brown (Chocolate)We hand dyeing with leather dye agents from Fiebings (USA) and Kenda Farben (Italy). Product colors may slightly vary due to photographic lightings or your display monitor settings. Also the hand dyeing process make the sheath stylish and unique appearance.Note:We are selling the leather sheath only, the Buck 112 Ranger is NOT included.This sheath designed to fit Buck 112 Ranger Clip Point Blade.Shipping: This is International shipping from Vietnam. The International shipment may be a subject of customs processing and required an extra time. Shipping to US: Shipping time is around 10-12 business days. The package will be shipped to US then handled by USPS since the package arriving to US. The USPS tracking number will be provided and be able to tracked after 6-8 days since shipping day from VietnamShipping to UK, EU and Canada: Shipping time is around 12-20 business days. The package will be shipped to UK then handled by Royal Mail (UK) since the package arriving to UK. The Royal Mail (UK) tracking number will be provided and be able to tracked after 8-10 days since shipping day.Shipping to Australia: Shipping time is around 15-25 business days. The package will be shipped to Australia then handled by Australian Post since the package arriving to Australia. The Australia Post tracking number will be provided and be able to tracked after 8-12 days since shipping day.Please consider for International shipping time before place an order. Your understanding and patience are greatly appreciated. Thank you!Hanoi Pearl Custom Leatherwork make a wide range of leather sheaths for Buck 110 Hunter, 112 Ranger knives: Belt loop, Clip-on, Scout (horizontal) carry, 15 degree (FBI cant) carry, 30 degree, 45 degree, 52 degree… to meets the demands of various clients. If you need any information, please feel free to contact us at anytimeThank you for visiting and your interesting of my handicrafts.Proudly handcrafted by Hanoi Pearl Custom Leatherwork – Carry As A Pro
Custom Black Scout Carry Leather Sheath for Buck 110 Folding Hunter
Handmade Horizontal Leather Sheath for Buck 110 Folding Knife. This custom scout carry leather sheath allows to comfortably horizontal carry the Buck 110 Folding Hunter in many different positions in your belt: Appendix Carry (1-2 o’clock, above you right front pocket), Hip Carry (3 o’clock) Back Carry or SOB Carry. The sheath designed for Right-Handed, but the Left-Handed can use it as Cross Draw Carry Scout carry is a great way for daily carry, it’s comfortable, concealable, quick accessibility, easy to draw the knife when needed. The belt loop fit belts up to 1.5 inches (40 mm) wide. The sheath was wet molded with the real Buck 110, so it fit perfectly to the knife, secure the knife tightly and safely in the sheath. You may need some effort to pull the knife out of the sheath. The sheath was made with 7-8 oz (3-3.2 mm) vegetable-tanned cowhide leather. We always use full-grain leather, the strongest and most durable leather, to make sheaths and holsters. It help the sheaths and holsters last for years Hand cutting, wet molding, dyeing and sewing. Hand saddle stitch techniques, double stitch at the end points for strength and durability. Edges beveled, smoothed and burnished. The color of the sheath is Black, we use Toledo Super Black Leather Dye from Kenda Farben, Italy. Note: We are selling the leather sheath only, the Buck 110 Folding Hunter is NOT included.This sheath designed to fit Buck 110 Clip Point Blade Hunter.Shipping: This is International shipping from Vietnam. The International shipment may be a subject of customs processing and required an extra time. Shipping to US: Shipping time is around 10-12 business days. The package will be shipped to US then handled by USPS since the package arriving to US. The USPS tracking number will be provided and be able to tracked after 6-8 days since shipping day from VietnamShipping to UK, EU and Canada: Shipping time is around 12-20 business days. The package will be shipped to UK then handled by Royal Mail (UK) since the package arriving to UK. The Royal Mail (UK) tracking number will be provided and be able to tracked after 8-10 days since shipping day.Shipping to Australia: Shipping time is around 15-25 business days. The package will be shipped to Australia then handled by Australian Post since the package arriving to Australia. The Aus Post tracking number will be provided and be able to tracked after 8-12 days since shipping day.Please consider for International shipping time before place an order. Your understanding and patience are greatly appreciated. Thank you!Hanoi Pearl Custom Leatherwork make a wide range of leather sheaths for Buck 110 Hunter, 112 Ranger knives: Belt loop, Clip-on, Scout (horizontal) carry, 15 degree (FBI cant) carry, 30 degree, 45 degree, 52 degree… to meets the demands of various clients. If you need any information, please feel free to contact us at anytimeThank you for visiting and your interesting of my handicrafts.Proudly handcrafted by Hanoi Pearl Custom Leatherwork – Carry As A Pro