• Login
P38 & P51 Original Military Can Opener Emergency Survival Tool with 4.5″ Chains

2 – Original Shelby Co US Military P-51 Can Opener – Made in USA Multi-Use Tool

2 - NEW Original Shelby Co US Military P-51 Can Opener - Made in USA About this item:You will receive 2 brand new P-51 openersMade in the USAStainless Steel ConstructionWeight: .3 oz.Multi-use Tool (see list below)P-51 Can Opener History and InformationOPENER, CAN, HAND, FOLDING, TYPE IIP-51 CAN OPENER"John Wayne"The P-51 can opener is the "big" brother of the P-38 can opener. Many an "expert", has espoused as "fact" that the government never issued a P-51 can opener and that the P-51 was some aftermarket creation of the manufacturer to sell more can openers. To dispel any confusion and to set the record straight about the P-51 can opener - the P-51 is in fact an official Government Issue item. The P-51 was conceived, designed and produced shortly after the introduction of the P-38 can opener. The P-51 can opener is still in the military inventory and is currently assigned NSN 7330-01-289-8827. The P-51 is somewhat obscure and elusive because military Mobile Kitchen Trailers (MKT) are currently issued a counter top mounted, hand crank, rotary, can opener and a Opener, Can, Hand, For Tray Packs and Round Cans (A-A-52202) as standard issue.This can opener was designed to open larger cans such a commercial No.10 institutional food can with a lid diameter of 6-3/16 inches and food tray packs and T-Rats that are used in Mobile Field Kitchens (MKT) and mess halls.Much like the P-38 can opener, the P-51 derived it's name from the fact that it took approximately 51 twists to sever the lid from a commercial No. 10 can.(Above Credit: DogTagsRus dot com and Georgia-Outfitters where more information can be found.)(Below Credit: Defense Media Network dot com, Article on Sept. 16, 2023 by Robert F. Dorr and Fred L. Borch entitled "The P-38 Pocket Can Opener Was an Army and Marine Icon.)Here's one for you!Although “Opener, Can, Hand, Folding” is its official Army nomenclature, it soon acquired the popular name P-38.However, historians disagree as to which of three theories explains the moniker. One is that soldiers called it the P-38 because it could open a can faster than the P-38 Lightning fighter plane could fly. A more likely explanation is that the “38” comes from the length of the can opener, which is 38 millimeters (or 1 1/2 inches). It also is possible that “38” was the number of punches (a “P” word) it took to open a ration can. All experts agree that P-38 did not derive its name from the Walther P-38 pistol used by the German military in World War II.43 Uses for the P-38 & P-51 Can Openerscan opener (duh!)all-purpose toothpickfingernail cleanersplinter removerflat-head screwdriver – use one of the endsphillips-head screwdriver – use one of the cornersbottle openerbox cutterletter openerchiselstirrerneck slasher (women used to carry to use in case of attack)seam rippercut fishing lineopen paint canswindow scraperscrape around floor cornersdiggingclean out groove on Tupperware lidsreach in and clean out small cracksscrape around edge of boots{in the field} gut fish{in the field} scale fishtest for “doneness” when baking on a camp fireprying itemsstrip wirescrape pans in the fieldlift key on flip top cansbartermarking tooldeflating tiresmeasurementstriking flintpuncturing plastic coatingknocking on doorsMorse Codewrite emergency messagesscratch an itchsave as a souvenirrip off rank for on the spot promotioncarburetor repair toolbee sting removal tool (scrape off w/ blade)knife sharpenerShips in one day or less.

1 PC Shelby P-51 Can Opener & Keyring USA Military Camping Hiking Survival

1-P51 Can Opener Shelby & Keyring USA Military Camping Hiking Survival About this item: The package includes 1 pieces of Shelby military can opener & 1 keyring. The opener is made from quality stainless steel material, sturdy, reliable, and durable which will serve you for a long time. Embossed with US Shelby Co. & made in the USA. The stainless steel split ring is approximately 1" in diameter. P-51 Can Opener History and Information OPENER, CAN, HAND, FOLDING, TYPE II P-51 CAN OPENER "John Wayne" The P-51 can opener is the "big" brother of the P-38 can opener. Many an"expert", has espoused as"fact"that the government never issued a P-51 can opener and that the P-51 was some aftermarket creation of the manufacturer to sell more can openers. To dispel any confusion and to set the record straight about the P-51 can opener -the P-51isin fact an official Government Issue item. The P-51 was conceived, designed and produced shortly after the introduction of the P-38 can opener. The P-51 can opener is still in the military inventory and is currently assigned NSN 7330-01-289-8827. The P-51 is somewhat obscure and elusive because military Mobile Kitchen Trailers (MKT) are currently issued a counter top mounted, hand crank, rotary, can opener and a Opener, Can, Hand, For Tray Packs and Round Cans (A-A-52202) as standard issue. This can opener was designed to open larger cans such a commercial No.10 institutional food can with a lid diameter of 6-3/16 inches and food tray packs and T-Rats that are used in Mobile Field Kitchens (MKT) and mess halls. Much like the P-38 can opener, the P-51 derived it's name from the fact that it took approximately 51 twists to sever the lid from a commercial No. 10 can. (Above Credit: DogTagsRus dot com and Georgia-Outfitters where more information can be found.) (Below Credit: Defense Media Network dot com, Article on Sept. 16, 2023 by Robert F. Dorr and Fred L. Borch entitled "The P-38 Pocket Can Opener Was an Army and Marine Icon.) Here's one for you! Although Opener, Can, Hand, Folding is its official Army nomenclature, it soon acquired the popular name P-38.However, historians disagree as to which of three theories explains the moniker. One is that soldiers called it the P-38 because it could open a can faster than theP-38 Lightningfighter plane could fly. A more likely explanation is that the 38 comes from the length of the can opener, which is 38 millimeters (or 1 1/2 inches). It also is possible that 38 was the number of punches (a P word) it took to open a ration can. All experts agree that P-38 did not derive its name from theWalther P-38pistol used by the German military in World War II. 43 Uses for the P-38 & P-51 Can Openers can opener (duh!) all-purpose toothpick fingernail cleaner splinter remover flat-head screwdriver use one of the ends phillips-head screwdriver use one of the corners bottle opener box cutter letter opener chisel stirrer neck slasher (women used to carry to use in case of attack) seam ripper cut fishing line open paint cans window scraper scrape around floor corners digging clean out groove on Tupperware lids reach in and clean out small cracks scrape around edge of boots {in the field} gut fish {in the field} scale fish test for doneness when baking on a camp fire prying items strip wire scrape pans in the field lift key on flip top cans barter marking tool deflating tires measurement striking flint puncturing plastic coating knocking on doors Morse Code write emergency messages scratch an itch save as a souvenir rip off rank for on the spot promotion carburetor repair tool bee sting removal tool (scrape off w/ blade) knife sharpener Ships in one day or less

Shelby P51 & P38 Can Opener + Keyring USA Military Camping Hiking Survival

Shelby P51 & P38 Can Opener + Keyring USA Military Camping Hiking Survival About this item: The package includes: 1 Shelby P51 military can opener 1 Shelby P38 military can opener 1 Stainless Steel Keyring The openers are made from quality stainless steel material, sturdy, reliable, and durable which will serve you for a long time. Embossed with US Shelby Co. & made in the USA. The stainless steel split ring is approximately 1" in diameter. Insured Shipping by eBay Standard Envelope P-51 Can Opener History and Information OPENER, CAN, HAND, FOLDING, TYPE II P-51 CAN OPENER "John Wayne" The P-51 can opener is the "big" brother of the P-38 can opener. Many an"expert", has espoused as"fact"that the government never issued a P-51 can opener and that the P-51 was some aftermarket creation of the manufacturer to sell more can openers. To dispel any confusion and to set the record straight about the P-51 can opener -the P-51isin fact an official Government Issue item. The P-51 was conceived, designed and produced shortly after the introduction of the P-38 can opener. The P-51 can opener is still in the military inventory and is currently assigned NSN 7330-01-289-8827. The P-51 is somewhat obscure and elusive because military Mobile Kitchen Trailers (MKT) are currently issued a counter top mounted, hand crank, rotary, can opener and a Opener, Can, Hand, For Tray Packs and Round Cans (A-A-52202) as standard issue. This can opener was designed to open larger cans such a commercial No.10 institutional food can with a lid diameter of 6-3/16 inches and food tray packs and T-Rats that are used in Mobile Field Kitchens (MKT) and mess halls. Much like the P-38 can opener, the P-51 derived it's name from the fact that it took approximately 51 twists to sever the lid from a commercial No. 10 can. (Above Credit: DogTagsRus dot com and Georgia-Outfitters where more information can be found.) (Below Credit: Defense Media Network dot com, Article on Sept. 16, 2023 by Robert F. Dorr and Fred L. Borch entitled "The P-38 Pocket Can Opener Was an Army and Marine Icon.) Here's one for you! Although Opener, Can, Hand, Folding is its official Army nomenclature, it soon acquired the popular name P-38.However, historians disagree as to which of three theories explains the moniker. One is that soldiers called it the P-38 because it could open a can faster than theP-38 Lightningfighter plane could fly. A more likely explanation is that the 38 comes from the length of the can opener, which is 38 millimeters (or 1 1/2 inches). It also is possible that 38 was the number of punches (a P word) it took to open a ration can. All experts agree that P-38 did not derive its name from theWalther P-38pistol used by the German military in World War II. 43 Uses for the P-38 & P-51 Can Openers can opener (duh!) all-purpose toothpick fingernail cleaner splinter remover flat-head screwdriver use one of the ends phillips-head screwdriver use one of the corners bottle opener box cutter letter opener chisel stirrer neck slasher (women used to carry to use in case of attack) seam ripper cut fishing line open paint cans window scraper scrape around floor corners digging clean out groove on Tupperware lids reach in and clean out small cracks scrape around edge of boots {in the field} gut fish {in the field} scale fish test for doneness when baking on a camp fire prying items strip wire scrape pans in the field lift key on flip top cans barter marking tool deflating tires measurement striking flint puncturing plastic coating knocking on doors Morse Code write emergency messages scratch an itch save as a souvenir rip off rank for on the spot promotion carburetor repair tool bee sting removal tool (scrape off w/ blade) knife sharpener Ships in one day or less

10 – 100 PCS Stainless Steel 3.5″ Ball Chain For P38 & P51 Can Openers

10-100 Pcs 3.5 inch Long Stainless Steel Ball Bead Chain Nickel Plated Keychain, each with Matching Connectors 2.4 mm Diameter Ball Chain About this item: Material: Made of stainless steel (titanium steel) Metal, which is corrosion-resistant and does not fade. Chain Length (Each) : 9.5 cm / 3.7";Bead Diameter : 2.4 mm / 0.09" Color : Silver Tone Application: Perfect for securing P-38 & P-51 can openers to backpacks, belt loops, keychains etc. Also excellent for hanging nail files, label tags, foldable scissors, keys,dog tags, bottle cap pendant necklaces, scrabble tile pendant necklaces,or making your own key chains. Very suitable for shops, festivals and birthday DIY crafts. Package: Standard 1st class envelope or small package depending on quantity purchased. Tracking provided with all orders.