Acid Tactical® 47” Paracord jig - Revision 2018 Our 47” paracord jig can be used to produce a huge variety of paracord items. The towers were designed to hold different sized clasps, hooks, snaps, & more. The jig itself is made of aircraft grade aluminum with a powder coated finish. There is a corresponding tape ruler attached to each section and foam pads on each end. The 47” jig is mainly comprised of three 16” tracks and two adjustable towers. The tracks slide into each other and are secured using bolts and wing nuts. The towers slide into the tracks on each end once the tracks are secured together. The towers can be secured to the track depending on your needs. The very top of the towers were designed for clasps from small 1” to over 2”. The hole cutouts can be used for hooks and snaps. There’s also a horizontal threaded rod that can be used for a variety of paracord hardware. The jig can be secured to a flat clean surface using the supplied suction cups and wing nuts. We also include two screws if you desire to secure it permanently to a work bench. Be mindful that you may need to slide both towers to acquire the correct length for your project. This will mean you may not always start at the 1” line. Be sure to measure with your own measuring tape or ruler. You may also need to secure the towers at your required length before securing to the suction cups. Once the suction cups are secured you will not be able to slide the towers past the wing nuts securing the suction cups. We have been making and selling jigs for 5 years. Over the years we have made many revisions to improve our design. With our 2018 revision we have designed a whole new jig. We wanted an even more light weight jig that could collapse to a small area. We hope that it can make paracording in bulk faster and more productive. Also available are our 15” and 31” models of our paracord jig. Feel free to download the full description and Assembly guide PDF files below. Jig47Description.pdfJig47Assembly.pdf Acid Tactical LLC Inman, SC 29349